On February 7th, 2010 04:20 a visitor came here looking for "Sony Bravia compatible Articulating Wall Mount" and that person was viewing the following page:

Sony Bravia XBR-Series KDL-40XBR4 40-Inch 1080p LCD HDTV
Great when it works. LOUSY Sony customer service Be very careful. I purchased both 46" and 40" XBR4. Great picture but chip sets in each TV have had to be replaced. First chip set was within one year ...

If somehow that page does not seem relevant to you here are some products with the description/reviews matching the search term :

1. This Universal Articulating Wall Mount is compatible with most 27" -52" Plasma and LCD TVs on the market today.
2. Compatible with VESA 200x200 up to a maximum of 700x450
3. Integrated cable management
4. Double Studs Mounting supports up to 125 lbs. ( Warning: Do not mount in metal studs)
5. Pushed against the wall it rests about 5" and when fully extended out the back of your TV will be 25" from the wall.

Editorial Review :

This Super Strong Universal Articulating wall mount bracket is compatible with most 27" to 52" flat panel Plasma and LCD displays. due to its VESA size ranges and weight capacity, it will support 52" TVs as well without any problem. This mount has a feature like no other that you can shift the TV left or right of center up to 4" for centering on your wall. The Articulating arm has extensions ranges of 5" to 25". The arm has a integrated cable management system build right into it to help keep the cables hidden. The mount comes with the adapter plate to fit up to VESA 700mm x 450mm hole patterns. Note: This mount will not fit VESA below 200x200.Be sure to check your TV model number before ordering. .... WARNING: NOT FOR MOUNTING INTO METAL STUDS!!!!

Customer Review :

No review yet

1. Maximum weight capacity: 175lbs
2. Tilt: -15 to +15 degree up and down.
3. Swivel: -60 to +60 degree side to side
4. Extension from wall: about 5" to 20
5. FREE 6ft HDMI cable

Editorial Review :

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20.3 inches from the wall. Its dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Is this the mount for me? * Do you prefer the look and feel of the dual arm design, and appreciate its incredible sturdiness? * Does a 20 inch wall extension meet your installation needs? Product Features * Continuous angle adjustment with glossy, black knobs. * Security locking mechanism to prevent the TV from unlatching from wall. * Built in bubble level included in backplate for convenience. Will this mount fit my flat screen? * This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be less than 770mm (30.3 inches) apart horizontally and 480mm (18.8 inches) vertically. * Maximum weight capacity: 175lbs. Product Dimensions * Wall plate: 500mm width by 278mm height. * Box dimensions: 20.8 inches x 13.8 inches x 2.5 inches * Product weight: 14.0kg Range of Motion * Tilt: +- 15 degrees up and down and any angle in between. * Swivel: 60 degrees in both directions * Extension from wall: anywhere from 4.5 inches to 20.3 inches. Design & Construction * Solid toughened steel construction * Durable scratch resistant finish. * Easy installation. Included in Box * Mount and all nuts, bolts and washers necessary for installation. * Product manual * Free 6ft HDMI Cable

Customer Review :

No review yet

1. FREE 6ft 1080p Male-Male HDMI Cable Included!
2. This is one of our premium, Best Selling Universal Swivel Mount. It offers extreme versatility, with a maximum extension of 20 inches.
3. Tilt: -15 to +15 degree up and down. Swivel: -60 to +60 degree side to side
4. Extension from wall: about 5 inches to 20 inches
5. Included in Box: Mount, Mounting hardware, User manual

Editorial Review :

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20 inches from the wall. The dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Do you prefer the look and feel of the dual arm design, and appreciate its incredibly sturdiness? Does a 20 inch wall extension meet your installation needs? Then this mount is for you! This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be 30 inches or less apart horizontally & 18.75 inches or less apart vertically. This corresponds to a maximum vesa of 750×450 * Your TV should weigh less than 175lbs/ 79 kg. * This mounting bracket is not compatible with certain PIONEER and Sharp® brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U. Dimensions * Front plate: 32 inches x 9 3/8 inches * Wall plate: 19 11/16 inches x 11 inches * Measurements are from edge to edge. Mounting points for bolts will be shorter. Range of Motion Design & Construction * Solid 2.5mm heavy-gauge cold steel construction * Durable powder-coated finish in black * Easy installation. Included in Box * Mount * Mounting hardware * User manual

Customer Review :

No review yet