1. Fits most 15-23" TV LCD Monitor and Display.
2. VESA 75x75mm/100x100mm compliant. Tilt +/- 15 degree, swivel left/right 180 degree.
3. 55 lbs load capacity, 3"-20" extension from the wall. Cable management design on arm
4. Multi-directional adjustment tilts, swivels, swings, and extends
5. Single stud mounting. Hardware pack included.

Editorial Review :

This ML513B LCD TV Wall Mount is ideal for obtaining side-to side rotation and upward/downward tilt. It supports LCD & LED screens up to 55 lbs. Compatible with screens that have VESA 75mm/100mm mounting hole patterns. Arm extends from wall up to 20" or folds flat to save space. VideoSecu brand TV wall mount with logo.

Customer Review :

Great product!

This device feels very solid and secure; I was not nervous at all to mount my television, even though it is at the higher end of the weight range for this wall mount. The mount came with several different size screws, in order to fit different types of monitors, and even came with an allen wrench to adjust the resistance of the up/down swivel mechanism. I can now aim my flat screen anywhere in the room. AND, it folds up very thin against the wall, which is really nice for tucking your television away discreetly. I gave it four stars instead of five because there is a slight tilt when the arm is sully extended; it's not noticeable at all when watching television, however. For the price, I'm very happy with this wall mount.

Rating :

Its ok.

Good product, but I agree with the previous review about the screws being cheap. It seems to be well built other than that. I do not have a heavy screen, but the mechanics seem solid.

Rating :

AN OVERALL QUALITY ITEM at a GREAT PRICE!

My husband was going to pay almost $150 for a wall mount for his smaller 17" NEC monitor to hang up over his 27" iMac. He had me searching all over the internet including ebay for the best deal on the exact (more expensive) one that he wanted. Then he somehow came across this one and we purchased it right away. The quality is excellent, it was a snap to install, all the hardware was included and after measuring it and marking the wall, it was up and hanging in about 3 minutes. We are not hanging a huge monitor on it but my husband is very picky and he is thrilled with this mount. Will definitely buy this brand again and would definitely purchase from this seller. Very happy.

Rating :

Great product for a cheap price!

Advantages
1. Well built and heavy construction material
2. Priced well below compare to other products available with same quality.
3. Package contains everything. And 6 screws is good to keep this on wall with out any issue! Washers and screws which can fit multiple type of TV's.
4. Movements of each part is pretty good

Disadvantage
None I can think of

Rating :

I sent this review once; very satifsified, well made and priced right. A+ transaction!!!!

VEry satisfied, built right and price right as well. Would deal with this vendor again, shipped fast and as advertised and more. Easy installation and lots of adjustments for viewing; I would reccomend this to my MOTHER.

Bill Barkdull

Rating :

More reviews...

1. Screen held only .7" (18 mm) from wall for low-profile installation
2. Screen adapter plate simply slides into the wall plate for quick and easy installation
3. Screen adapter plate included compatible with VESA 75 mm and 100 mm mounting patterns
4. Includes hardware for installation to wood studs, concrete, and cinder block

Editorial Review :

The new Universal Flat Wall Mount is compatible with virtually any 10" to 24" LCD flat panel screens. With a quick and easy installation, this low-profile mount is perfect for tight spaces in a home or commercial environment. The mount is capable of being mounted on wood studs, concrete, or metal studs (with additional metal stud fasteners). Compatible with VESA 75 mm and 100 mm mounting patterns.

Customer Review :

good product

great product, mounts easily and with all hardware. cant get any closer to the wall!
One note: so close to the wall that accessing jacks, and inputs can be an issue.

Rating :

Works as it should

Mounted my 22" LCD into a stud using the two long wood screws. Seems to be good quality. Only problem I had was that it was a little difficult to tighten the screws underneath the TV to secure the two brackets. Otherwise, it's pretty much a flat mount and very secure...and cheap!

Rating :

Exactly what I wanted

I bought this to mount a 19" monitor. I really like how thin it is... I can't imagine a mount that puts the monitor any closer to the wall than this. It was easy to install and it's VERY sturdy with 2 lag screws in the center of a stud.

Rating :

Good deal, be aware of overhead clearance

I originally bought this to mount a TV 1 inch below a kitchen cabinet. It didn't work there because you need about 2.5 inches of clearance above the TV for it to slide down into the mount. It would have been nice if the instructions told you that before finding out the hard way. However, I was able to use it in a different room and I am pleased with it due to its low cost.

Rating :

1. Heavyweight 30 Lbs. of Pure Steel, High quality powder coat finish, Will hold TV Screens up to 165 Lbs.
2. Dual Arms Extend To Over 2o Inches; and Fold To Less Than 5 Inches
3. 120 Degree Swivel, +-15 Degree Tilt, Arm Extension/Collapsed Distance: Fully Extended: 21"
4. Hole Pattern Coverage: Up To 6.7" Horizontal by 19" Vertical or VESA 100x100, 200x200, 300x300, 400x400 and 400x600
5. Wall Plate Dimensions: 18.75 x 10.5", Cable Management: 6.25 x 5", TV Arm Dimensions: 19.75" x 1.75"

Editorial Review :

The GSI GDM2B is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. Thus, the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.

Customer Review :

No review yet

1. An adjustable TV wall mount
2. Supports 13-inch to 27-inch TVs
3. Support tray is adjustable
4. Optional PM47 VCR bracket
5. Color - BLACK

Editorial Review :

An adjustable TV wall mount / Supports 13-inch to 27-inch TVs / Support tray is adjustable / Optional PM47 VCR bracket / Black

Customer Review :

Peerless PM-1327 Universal TV Mount

We have an older type television that works like brand new so wanted to mount it in the swimming pool room for vegging in the pool. The hardware and TV holder are very sturdy so this was the perfect answer to get the television up high for viewing as well as keeping away from the humidity as much as possible.

We are very pleased with the quality, ease of installation, and the price. It is wonderful!

Rating :

Wall Mount

Instructions easy to follow. The product is strong and well made and does what it is built to do.

Rating :

Peerless Tilt Wall Mount for TV

I had an older 27" tube TV that I wanted to mount in our guest house. I would not recommend this mount for larger TV's, probably nothing above a 20". The arm that mounts to the wall seems stable and sturdy enough, but the platform that attaches to the arm is very wobbly. I have used other brands in the past and they are much more stable. I cannot recommend Peerless unless you are mounting a small CRT TV.

Rating :

review

The product was just as they said .Great service and great product,exactly what I was looking for,I would buy again from same vendor

Rating :

Works great and very durable

This bracket is very strong.
I use it every day at work with a 15 inch point of sale system that's about 40+lbs.
Very sturdy and easy to adjust.
It can be attached to just one stud.

Rating :

1. Universal Design Ceiling mount fits 32-55" Display, please check TV VESA and Weight. Fits all ceilings.
2. Fits VESA200x200 mm to VESA 680x400 mm mounting holes. Fits vaulted ceiling as well as flat ceiling.
3. Height adjustable from 26" up to 55". Loading capacity 110 lbs.
4. Tilt 15 degree up or down. Pan 360 degree. Cable through ceiling pole.
5. Package including: One TV ceiling mount , one 50cm extension pole, One standard hardware pack

Editorial Review :

Please check your TV for compatibility. If you are not sure, please contact us. We will check for you.

Customer Review :

Not as advertised

To start this product was advertised as "Video Secure" brand and Amazon asked to be notified if the advertised brand didn't ship. I notified Amazon but never heard a word back from them. There is absolutely no manufacturer identified on the box, no web site or telephone number for support and the directions are a joke. Spend a little more money and get a stronger "branded product" at Best Buy or other reliable dealer, the TV is too valuable to trust to a generic product.

Rating :

Ceiling mount

This is a very sturdy product and the instructions were fine as instructions go. they all seem a bit overdone to me.
None the less, it was easy to install, provided you have some know how of reinforcing these things to the ceiling.
It worked out very well for me and I'm happy with it.

Rating :