1. Cord managements system neatly gathers and routes cords for a clean look
2. Pan 30°, Tilt 15°, Swivel and Extend 10.5"
3. For LCD or Plasma TVs 10 inches to 42 inches and up to 100 pounds
4. $2000 Limited Protection Plan
5. VESA 75, 100, 200, 400, 600 and 800 mounting pattern standards

Editorial Review :

Easy to use and install, this Level Mount DC42SM is designed to fit any 10-42" LCD or Plasma TV up to 100 lbs. This unit is a motorized full motion LCD mount. It is remote controlled so you can adjust your screen to pan up to 30°, extend up to 10.5" and tilt up to 15° all from the comfort of your sofa. Everything you need for mounting is included right in the box. Each Level Mount unit includes: A built in Bubble Level, stud finder with battery, extender plates and mounting hardware. $20 value yours for FREE! We offer a Limited One year Warranty and a $2000 Limited Protection Plan. Installation is a breeze with our free on-line Tutorial and our Bi-Lingual Customer Support Line available 24/7/365. "Experience the Level Mount Difference"-Level Mount also offers a solution to hiding unsightly cords and wires without drilling holes into your walls. See our Level Mount Universal Wire Management Kit available for you to purchase ELEW5-07 and ELEW7-07.

Customer Review :

Absolutely Amazing!

I had purchased this TV mount for my brand new 40" Sony Bravia LCD. It qualified for Amazon Prime so I recieved it within 2 days and it came in a big somewhat banged up box. At first glance, I said to myself, oh no, here we go. But upon opening the first box, was another box inside of it, compeltely undamaged and protected by paper packaging, which made me feel good.

On to the installation. Ok, upon opening the level mount box, you immediately notice that there is one large, already assempled bracket, two tv bracket arms, and a bunch of screws, remote control, stud finder (which didn't work at all), and installation instructions. Luckily I had my own stud finder, plus the tried and true method of hammering nails till I found a stud (Which is very effective since the holes were going to be covered by the bracket anyways. The unit only mounts to 1 stud so it is extremely important that the mounting holes are as close to the stud centers as possible. So I picked up the relatively heavy mounting assembly, pressed it up against the wall to determine the height I wanted it to rest, then used it to trace the mounting holes. Then I set down the bracket, drilled the holes as instructed and used a socket wrench to screw in these 1/4" mounting bolts (Serious bolts). Once you installed the top bolt, then you hang the bracket on the bolt and then proceed to install the lower bolt with the mount in place. 2 bolts, thats it.

Next was installing the tv bracket arms to my Sony which was a little more tricky then expected. Levelmount supplies you with about 5 sets of different screws to use for all different Tv's. The ones meant for Sony's appeared not long enough for my liking, and being the ever handy man, had a set of metric bolts so I could substitute a better fit screw in for the supplied ones.

After applying some weight to the mount on the wall, in order to convince myself that my $$$$ TV was not going to fall and shatter, I went ahead and installed the TV to the mount, effortlessly.

For my particular setup (where all audio/video equipment is hidden in a closet out of view), I drilled a 2" diameter hole adjacent to the mount to allow the Level mount power cable along with audio and video cables to pass through the wall unseen to the naked eye.

* Now for my overall review of the unit...

For starters, the price was killer, almost the same as a standard non-tilting, non-motorized bracket at Best Buy would have cost.

The installation although in my case took about 1-2 hours (mostly due to the compelxity of my setup and just be extra cautious) was relatively easy and the instructions were for the most part easy and straight forward.

I have had this bracket for 4 months and it works phenominal. There are few things I have purchased over the years that I felt I lucked out on and just got a great deal, and this Level Mount is one of those items.

It allows us to swivel the set to watch while preparing meals in the kitchen, swivel the other way to allow me to sit in my recliner while playing Xbox, PLUS it stows away into a nice, TIGHT, package with a clean look.

Losing our entertainment center for this mount allowed us to gain 15" of walking space in an already tight apartment. If you want to gain floor space, while still have the ability to rotate/tilt your TV, this stand is perfect for you.

CONS: The only con I have is that the remote is a little flimsy, and the connection between the batteries and the battery prongs is a little loose causing the mount not to respond to button presses, however a good swift smack with my hand usually re-establishes the connection and smooth sailing after that. It could just be the cheap off-brand batteries that were supplied, so buying new AAA's might fix this one and only con.

Hope it helps, you won't be disappointed

Rating :

So far so good BUT (!) .....


I've unboxed and tested the unit's motors (for extension, pan and tilt) and everything is working, thus far, as described. However, while both the information here on Amazon and the installation manual list 100 lbs. as the maximum allowable t.v. weight, a sticker on the actual unit READS 80 POUNDS!!!! Lucky for me that my 42" TV is 75 lbs. sans speakers (81.2 with speakers attached) so I'm playing it safe. But if your TV is over 80 lbs, well, I'm unclear on which is correct...the sticker on the unit or the installation guide.

As my research on motorized wall units has turned up a plethora of units with burned out motors, I was skeptical of this inexpensive unit, but went ahead with the purchase as an xmas gift with the comfort afforded by purchasing it through Amazon. Seeing the conflicting weight limits has renewed, perhaps unjustifiably, my apprehension.

I'll write again if/when I Scully up an answer on the weight limit, and later when I can give a reliability/performance report.

Rating :

Very pleased with product and service!

First, the motorized wall mount surpasses our expectations. It works almost silently as it smoothly moves our 37" Vizio flatscreen HD television through the various positions possible with the unit. It allows the television to be seen clearly from every seat in our family/media room. The unit rates extremely high on the "coolness" chart as well. Our friends have seen it work and went from a skeptical "what now..." attitude to one of "that's cool".
I am very pleased with the ease we had in installing it. The hardware we needed (as well as that for many other televisions) was included, including a unique but reliable studfinder that doesn't rely upon finding nail heads in the studs under the sheetrock to identify each stud.
Here's the kicker... there was a component in the set we got that didn't work after an initial effort. I called the 24 hour help line, and got a very pleasant young lady who tried to assist, but couldn't. She notified their technicians and they sent the new part to me which arrived at our home just 6 days after my first call. This may sound like a long time, but they sent it two day fed ex, and spared no expense getting the package to us as soon as possible.
Now, the wall mount works perfectly (and was perfectly easy to install) and I know that I can rely on the sales, marketing, and engineering people at Elexa Consumer Products to take care of things professionally and swiftly should we have any other problems in the future, which I do not anticipate.

Rating :

1. Standard hardware to the wall and to TV included
2. Designed to easily install LCD panels on walls
3. 80-lb. maximal weight capacity; Black color wall mount
4. VESA 50/75/100/200x100/200 compliant
5. Slide together quick mount for LCD displays

Editorial Review :

Brand New Flush Universal Arm Wall Mount for Flat Panel Screen LCD Monitor TV. Universal Slim flat LCD mounts are incredibly easy to install, and feature a low-profile, sliding plate design that places the display very close to the wall for a clean look, while also providing a unique combination of simplicity and security. This mount is VideoSecu brand. Please report to Amazon.com if you recieve a mount without VideoSecu logo

Customer Review :

No review yet

1. Fits most 37" to 63" large flat panel plasma and LCD TVs
2. Supports VESA 200x100 to 800 x 500 compliant displays
3. Standard Mounting hardware to the wall and to TV included
4. Loading capacity 110 lbs. For 2 stud or 3 stud mounting.
5. Durable powder-coated black finish TV wall mount, extra large.

Editorial Review :

The Universal Brand New Flat Panel TV Wall Mount Bracket fits most 37" to 63" Plasma TV. Fits VESA 200/300/400/500/200x100/400x200/500x400/600x400/700x500/800x500 up to 890x510mm and any hole pattern within 200 to 850 mm (8" - 33") wide and 100 to 510 mm (4" - 20") high. It is an easy-to-use, fixed mount. Ultra-slim design keeps your LCD or plasma tight to the wall, giving boardrooms, digital signage, lobbies, or home theater a professional look. This flat LCD/Plasma mount comes with everything you need for a quick and lift and lock design for easy installation., Installed in no time. Simply attach two universal mounting brackets to TV, and hang on wall mounting plate, it provides a versatile and secure solution for mount large Plasma and LED LCD Ultra slim TVs. Will This mount Fit my Plasma TV?First, check the weight of your TV. It must be less than 110 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within 20", horizontal distance within 33", then this bracket will fit. Finally, the width of your TV should be 37" or above, otherwise the mount is too wide to hide behind your TV. This mount is VideoSecu brand. Please report to Amazon.com if you recieve a mount without VideoSecu logo

Customer Review :

No review yet

1. Color: Black
2. Wall Plate: 32" x 8 7/8" (Edge to Edge)
3. Tilt Feature: -15° Degrees - Variable Downward Tilt
4. Maximum Weight Capacity: 165 lbs
5. Mounting Instructions & Hardware Included

Editorial Review :

This is an Angle Adjustable Black Wall Mount Bracket for LCD and Plasma Televisions. This Wall Mount supports most* 37" to 63" flat panel screens and plasma TVs weighing up to 165 lbs. This mount is perfect for boardrooms, digital signage, or home theaters. Included are simple to align brackets and a unique wall plate that can be mounted to a variety of wall constructions including wood studs or concrete. This wall mount supports VESA mounting patterns up to 750x450 and a maximum weight of 165lbs. It is constructed of toughened steel with a durable scratch resistant Black finish. Also included is all mounting hardware and simple to follow installation instructions. *Mounting holes on television should be 28" or less apart horizontally & 18.5" or less apart vertically.

Customer Review :

No review yet

1. Sold Individually

Editorial Review :

MOUNTING COMPONENT ( BRACKET ) FOR VCR OR DVD - STEEL - SILVER

Customer Review :

No review yet